0
By Aiken Staff on November 11th, 2010
Aiken Evaluates Custom-Built Process Vessel for Compliance with API 650
Aiken conducted an evaluation to determine if a custom-built process vessel met API 650.
Category: Engineering Design and Analysis
By Aiken Staff on November 11th, 2010
Aiken Contracted to Design Fire Test Facility
Aiken will design a fire test facility for the testing of riser joints.
By Aiken Staff on November 11th, 2010
Aiken Delivers EPIC Services to Subsea Equipment Manufacturer
Aiken improved and installed new manufacturing equipment for a subsea equipment manufacturer within a tight timeframe.
By Aiken Staff on November 11th, 2010
Aiken Designs Integrated Flange and Lifting Assembly for a BOP
Aiken delivered on a client’s request for a high pressure flange that could lift the BOP once attached.
By Aiken Staff on November 11th, 2010
Aiken Establishes Feasibility of Subsea Gas Pipeline Lift Procedure Using FEA
Aiken used FEA to determine the optimum lift procedure for a subsea gas pipeline that needed weld repairs.
By Aiken Staff on November 11th, 2010
Aiken Uses Elastic-Plastic FEA to Design Pressure Test Bunkers
Aiken Engineering is evaluating and designing new pressure test bunkers for an international equipment manufacturer.
By Aiken Staff on July 07th, 2010
Aiken Will Engineer, Design and Oversee Fabrication and Installation of Manufacturing Equipment Upgrades
Aiken Engineering has been contracted to engineer, design and project-manage the fabrication and installation of upgrades to equipment critical to the manufacturing process. Aiken’s project management services will include selection of all subcontractors, oversight of project costs and schedules, on site supervision, and delivery of all final documentation and drawings.
By Aiken Staff on July 07th, 2010
Aiken Will Modernize Design of Mud Valves for Onshore, Offshore Drilling
An oilfield equipment manufacturer has engaged Aiken to modernize the design of mud valves used for onshore and offshore drilling rigs. In particular, Aiken will focus on improving the high and low pressure sealing performance of the valve. The client will complete all verification testing, and Aiken will provide its expertise during prototype testing. It’s anticipated that Aiken will also [...]
By Aiken Staff on February 02nd, 2010
Aiken Conducts Engineering Analysis on Connectors
Aiken Engineering conducted an engineering analysis on bolted connectors for a new subsea system.
By Aiken Staff on February 01st, 2010
Aiken Determines Cause of Fatigue Cracks in Press
Aiken was contracted to determine the cause of fatigue cracks in a 29,000-ton press.
By Aiken Staff on January 29th, 2010
Aiken Determines Operating Limits of Gin Pole Trucks
Several major energy companies asked Aiken to determine the trucks’ operating limits.
